Newport News |
Code of Ordinances |
Appendix B. SUBDIVISION REGULATIONS |
Article VII. REQUIREMENTS OF FINAL PLATS |
§ 7-01. Preparation of final plat.
7-01.1.
Who may prepare final plat. Final plats shall be prepared by a certified professional engineer or land surveyor duly licensed by the Commonwealth of Virginia.
7-01.2.
Method of presentation. Final plats shall be drawn in ink on reproducible media as approved by the administrator to a scale of one (1) inch equals one hundred (100) feet with letters and figures not less than eight one-hundredths (0.08) of an inch in height on a sheet, or sheets, with the following dimensions: The plat shall be sixteen (16) inches wide and twenty-two and four-tenths (22.4) inches long with a three-inch border on three (3) sides. The top side shall contain a four-inch border which shall be along one (1) of the twenty-two and four-tenths (22.4) inch sides. The overall size of said plat shall be twenty-three (23) inches wide and twenty-eight and four-tenths (28.4) inches long, and shall show the following information set forth in the following subsections of this article.