§ 33.02-32. Same—Class 2 site plans.

Class 2 site plans shall contain sufficient information to facilitate an engineering review so that the director can determine whether the plan may be accepted for review rather than requiring that the proposed development activity be handled through the review process for Class 1 site plans. Information required to be indicated on a Class 2 site plan includes but is not limited to the following:

(1)

The name of the development and the street address, when available or assigned by the city.

(2)

The name and address of the owner of record and the developer.

(3)

The zoning of the site and adjacent properties; zoning district lines with associated transitional areas, if applicable.

(4)

The identifying number and approval date of any special exceptions, variances, conditional-use permits or planned residential development (PRD) approvals affecting the site.

(5)

Date, scale and north arrow.

(6)

A vicinity sketch showing the location of the property in relation to one (1) or more public streets.

(7)

As appropriate for the site under consideration, the location, type, dimension, elevation, size and/or number of the following existing and proposed items:

a.

Site entrances and parking lots, with associated pavement design/cross-section.

b.

Areas that are designated as recreational.

c.

The limits of clearing, including the driplines of trees to be preserved on the site.

d.

Methods of collecting, retaining, directing or disposing of stormwater, including appropriate drainage calculations.

e.

Chesapeake Bay Preservation areas. The Class 2 site plan shall show a delineation of any Resource Protection Area ("RPA") and/or Resource Management Area ("RMA") if the property falls within an area regulated by the CBPA. The Class 2 site plan shall also include a note that states that the RPA will be retained as an undisturbed and vegetated one hundred (100) foot buffer not subject to development under this Code section 37.1-51(b)(1), unless the development is a water dependent facility or redevelopment. If the area to be developed has a septic system, or other onsite sewage treatment facility, the Class 2 site plan shall include a note citing to this Code section 33-91.1, indicating that there is a requirement for pump-out of the system every five (5) years and a one hundred (100) percent reserve drain field sites for onsite sewage treatment systems.

f.

Site impervious area calculations.

g.

Areas where special regulations apply to properties on or adjacent to airports.

h.

Areas of all required transitional area and landscaping and green area required and provided, including the number of trees and shrubs required and provided on the site to meet the provisions of this chapter.

i.

Other information as necessary to ensure compliance with city regulations, policies and procedures.

(Ord. No. 4952-96; Ord. No. 5030-97; Ord. No. 7455-18)

(Ord. No. 4952-96; Ord. No. 5030-97; Ord. No. 7455-18)